© PCE Instruments
31
Notes:
•
Maximum no. of readings that can be stored in
Logging Mode
Max. Reading
Periodic
150000
Key Press
528
•
In Periodic mode, changing of any Measure or Source parameter is not allowed. So
while Periodic Logging is Running, the user can’t enter into
MEASURE
,
SOURCE
and
DISPLAY
menu. But in Key Press Logging mode, there is no restriction.
•
In Periodic Mode, if an error message like “
Not Sufficient Memory
” comes while starting
the Logging, try reducing the logging time or increase the sampling period or try deleting
some existing files.
•
In Key Press Mode, if the no. of samples reaches its maximum limit that is 484, the next
sample
will
start
from
the
first
overwriting
the
memory.
•
While Logging is running, entering into the
LOGGING
menu shows below page.
for Periodic Mode
for Key Press Mode
•
For Periodic Mode, this page contains information of Number of Samples Taken
and Time Remaining for Logging in HH:MM: SS.
•
Both Periodic and Key Press logging can be stop manually by pressing F1 key on
STOP LOGGING Button. For Periodic Mode, Logging will automatically stopped
when defined log time ends and a message “
LOGGING DONE
” pops up.
Transferring the Results to a Personal Computer:
A 32-bit Windows® software called
mCAL+.exe
can be downloaded here:
https://www.pce-
instruments.com/english/download-win_4.htm
. Start this software just as any other Windows®
software.
All communication between the PC and PCE-LOC 20 is initiated from
mCAL+.exe
.
More information on the software can be found in the separate software manual.
