© PCE Instruments
8
2.2.5
Stand for Table Top Use
•
This stand offers the best support for table top use which gives good viewing angle when
the PCE-RTD 20 is placed on a table.
•
Procedure to open stand:
is being engraved on the top of the
stand.
You should pull a bit first.
is being engraved on the bottom of the
stand. Now during first pull of above you
can
release this lower part easily so that you
can
maneuver the stand as you like.
2.3
Power Options
There are three power options:
•
Lithium-Ion battery: All the instrument functions are available with a charged battery.
•
5 V DC charging adaptor: It supplies power to the instrument and charges the battery at the
same time. It charges the battery when the instrument is on or off.
•
USB mini Type B connection: This charges the battery when the instrument is off and
increases the battery life when the instrument is on.
2.4
Battery
The Device uses 2300mAh Lithium-Ion battery.
WARNING
•
To prevent an explosion or fire, do not short circuit, do not disassemble, and keep it safe
from damage.
•
To prevent an explosion or fire, use only the supplied battery, battery charger and USB cable.
•
To prevent battery leakage or heat generation, only use the battery charger in the
temperature range 0 … 45 °C (32 … 113 °F).
When you set the power on, the battery symbol at the top of the display shows the charging
status. To get more information on the battery, go to the Battery Info Page in the Setting menu.
