© PCE Instruments
17
iii. CheckBox
CheckBox is used where Binary Value (1/0, True/False) is available for any parameter.
To change the CheckBox status press
F1
key. This will enter into the edit mode. In this mode
status can be toggled by pressing
F1
key. Press
MENU/ENT
key to store new status.
iv. RadioButtonBox
RadioButtonBox is used where very few values can be possible and all the available values
need to be visible.
In this device, two types of RadioButtonBox are available. One with 1 value can be selectable
and the other where 1 or 2 values can be selectable at a time.
In RadioButtonBox, the other option can be selected by pressing
MENU/ENT
key on that option.
When pressing this key the new option will be selected and the other option will be disabled.
Below an example is given, how to change RTD Source Mode from STEP to RAMP.
