© PCE Instruments
16
The above figure shows the example how to change Input High (100%) Range from 24.000 to
10.000 mA.
There are mainly 2 types of EditBox in this device. In most of the EditBox changing of decimal
point and changing of sign is not allowed. But there are few EditBox, where these are allowed.
Examples Scaled Low (0%) &High (100%) etc.
The below figure shown the example how to change decimal point of the Input Scaled High
(100%) Range.
To change the sign of the value, shift to the sign digit and pressing UP or DOWN key will toggle
the sign.
