Manual
65
8.1.12 Define reference points
To define or delete reference points, use the arrow key. With the help of those, you can select a position
and confirm with
. You can only define or delete reference points in the Laser Plane mode.
8.1.13 Result modes
There are three different modes to view the results.
Original:
Values are shown as positive and negative values
All positive:
Values are shown relative to the lowest value; values cannot be negative.
All negative:
Values are shown relative to the highest value; values cannot be positive.
No reference plane
Laser Plane
Best-Fit Plane
Original
All positive
All negative
