Manual
72
8.2.7
View and save results
If measurements have been carried out for all planes, press
for the result.
There are two reference models, you can switch between by pressing
Ref Points Mode: If one of the reference points is undefined, the result is the unchanged detector value. If
two reference points are defined, the result is the difference between the calculated reference line and the
detector value.
To define reference points, press
and enter reference point number 1 and reference point number 2.
Press
to save. In order to delete the reference points, enter the value
.
Best Fit Mode: In this mode, the result is the difference between the calculated best fit reference line and
the detector value.
The result can be displayed as a graph or as a table. By pressing
, you can switch between these
illustrations.
To save the results, press
.
Refer to chapter 10 “
Handling of the Data Dialogue window”
to do that.
Table view
graph view
Press
, to return to the main screen of the program or press
, to start the Live Mode.
Number of
calculated planes
Yellow indicates
a violation of the
tolearnce
Red indicates a
violation of the
tolerance
Result X-
axis
Result Y-
axis
Number of
reference point
Save result
Repeat
measurement
