Manual
66
8.1.14 Enter tolerances
Press
, to enter tolerances. Enter the required value to the entering field and confirm by pressing
or press
, to switch to the Auto Mode. If the Auto Mode is activated, the tolerances are defined as 35
% peak-to-peak.
8.1.15 View statistics
To view the statistics, press
.
Maximum:
maximum value
Minimum:
minimum value
Peak-Peak:
peak-to-peak value
Average:
average value
Std.deviation:
standard deviation value
Tolerance:
tolerance value
The coloured bar on the bottom of the screen shows error percentages and the amount of points in this
error ranges. The coloured bar is defined as described in the following:
blue :
value is
≤ 10% of the tolerance
light blue:
value is between 10% and < 20% of the tolerance
green :
value is between 25% and < 0% of the tolerance
yellow:
value is between 50% and < 100% of the tolerance
red
:
value is 100 % of the tolerance and more
Auto Mode
