General
61
SIPxNano IP-PBX Getting Started Guide
6 • System
General
This section covers:
•
“SIP Parameters”
on page 61
•
“Voice Mail”
on page 62
•
“Call Pickup”
on page 63
•
“Presence Server”
on page 64
•
“Logging”
on page 65
•
“Call Detail Records (CDRs)”
on page 66
To access the
General
screen, click
System > General
. General configuration of SIPxNano includes SIP
paramters, voicemail, call pickup, presence server, logging changes and settings, and call detail records (CDRs).
Note
When you click
Apply
after making changes to the sections under
General
,
the
Restart Services
screen will display. You can click Continue and restart
SIPxNano services or if the work you are currently performing requires you
to continue without restarting services, you can select the Do Not Restart
Services Now checkbox. In either case, services must be restarted at some
point for the Configuration changes to take effect, but settings will be saved
until that time.
SIP Parameters
To display editable SIP Parameters, click on the
Show Advanced Settings
link. You can edit the following:
Figure 36. SIP Parameters
•
Default Serial Fork Expiration:
Number of seconds that each phone in a sequential series is allowed to ring
with no answer before the next alternative is tried. The most common case for this is a user with one phone
and a voice mailbox - the phone will ring for this many seconds and then roll over to voice mail. The default
value is 20.
•
Default Expiration:
Number of seconds a call is allowed to go unanswered; if this many seconds pass, the
call request is returned with an error. The default value is 180.
