Device Profiles
39
SIPxNano IP-PBX Getting Started Guide
4 • Devices
Deleting files
To delete a file:
1. From the list on the
Files
screen, check the box next to the file you want to delete.
2. Click the
Delete
button.
3. A confirmation prompt will appear. Click
OK
.
Device Profiles
When you send profiles to IP phones:
•
The phones store the newly updated data in configuration files
•
New configuration settings do not take effect until the phone restarts
•
The Job Status log records the activity (see
“Gateways”
on page 35)
If the target phone is in use, it will not restart until it is idle. When an idle phone receives new profiles and a
restart request, it displays a message and restarts automatically after approximately one minute.
Note
You should plan to send profiles only when call volume is low.
To deliver new configuration settings to a Cisco 7900 series IP phone or a Patton SIP Softphone you send one,
two, or three profiles to that phone (profiles of device or user settings). To access the Send Profiles function:
1. Click on the device link (either
Phones, Gateways,
or
Files
) under the
Devices
link on the main menu.
2. Select the specific path or item from the list and click the
Send Profiles
button.
A confirmation message will appear at the top of the page. (In this example, the gateway device was used).
Figure 19. Sending profiles