Hunt Groups
49
SIPxNano IP-PBX Getting Started Guide
5 • Features
Hunt Groups
This section covers:
•
“Adding hunt groups”
on page 49
•
“Editing hunt groups”
on page 50
•
“Deleting hunt groups”
on page 50
Hunt Groups allow you to set up an extension that encompasses a group of users. When a hunt group exten-
sion is dialed, such as 400, a group of users associated with this master extension fall into a call sequence. You
can dial all the users within the hunt group simultaneously or set them up in a successive format so that when
there is no response by one user, another user is dialed. You can also define the initial user to dial in the hunt
group.
Adding hunt groups
To create a hunt group:
1. From the main screen, click
Features
>
Hunt Groups
>
Add Hunt Group
.
Figure 27. Adding a hunt group
2. Click the
Enabled
box to enable the hunt group.
3. Enter a name for the hunt group in the
Name
field
4. Enter an extension for the hunt group in the
Extension
field.
5. Create the call sequence for this hunt group by clicking Add User. Use the
search
bar to find the user you
want to add to the hunt group. Click the box next to the user(s) you want to add, and click
Select
.
6. On the
Hunt Groups
screen, define the hierarchy of users by selecting an associated user’s check box and
clicking Move Up or Move Down. You can also delete a user from a hunt group by selecting the user’s
associated checkbox and clicking Delete.
