Gateways
35
SIPxNano IP-PBX Getting Started Guide
4 • Devices
Gateways
This section covers:
•
“Adding gateways”
on page 35
•
“Editing gateways”
on page 36
•
“Deleting gateways”
on page 37
You can define gateways that the SIPxNano will use to route outbound calls. You can specify gateways to use
for routine calls sepertaely from gateways to use for emergency calls.
To access the Gateways page, click
Devices > Gateways
.
Adding gateways
To add a gateway:
1. From the
Add a new gateway...
drop-down menu, select
Unmanaged gateway
or
SIP trunk
.
Figure 16. Adding a gateway
2. Enter details for the following options:
–
Name:
The name of the gateway.
– Address:
IP address (example: 10.1.1.1) or a fully qualified hostname (example: gateway.example.com)
–
Serial Number (Unamanaged gateway):
Serial number contains 12 hexadecimal digits (0-9 and a-f ), for
example: 0040214131fa. Usually the serial number is set to the device's MAC address. For an unman-
aged gateway, the serial number is only displayed, not used.
–
Description:
A description of the gateway.
3. Click OK to save and return to the Gateways screen; click Apply to save and remain at the current screen;
click Cancel to return to the Gateways screen without saving any of the information you created.