Pathway connectivity solutions Cognito 2, Руководство пользователя

Страница: 22 / 165

Once the console shuts down, the Power Button should be pulsing blue indicating
it's in ‘stand-by’ mode.
NOTE

You can also press the Power Button twice to shut down the console. If you
want to escape from the Power Off screen and return to programming, you
can press the Release Button
.
What to do before each Performance

Warn anyone on stage before that all lights may be turned off (blackout).

From the Select task , press the Release button to the right of the
touch screen until “Release all active Cues and Memories?” appears on
screen. Press .

Ensure all lights/memories are off by placing the twenty sliders across the
top of the console are at the bottom of their travel. (see Setup|System|
Sliders always run memories )

Set the four sliders at the bottom of the console (two on either side) are at
the top of their travel. These are the
Grand Master , the Memory Master and
the Left and Right Playback Masters .

Select one light (any light) and press Info Screen then press Locks
and see if any lights are locked that shouldn't be. Press to leave this
screen.

Release to release the lights.

Execute the first cue or memory look of the show.
16