Pathway connectivity solutions Cognito 2 Скачать руководство пользователя страница 73

Страница: 73 / 165

Tasks

Desk Lock and Unlock can only be set from the console. The ‘locked’

intensity level is shown on the

Information

screen.

Desk Lock Light:

Available only from the Intensity tool. Freezes all attributes of the selected

light(s). Individual attributes of the light may be changed and included in
future cues or memories, as described above.

The Intensity of Desk-Locked lights are not affected by the Grand Master or

Dead Blackout button. Even with the Grand Master at 0%, the lights with a
locked level will remain ‘on’.

Tech Unlock:

Tech Lock may only be set using the

neato

™ iOS app, available from the

Apple App store.

neato

can remotely freeze, or lock, specific attributes of a

fixture. For example, applying Tech Lock to the intensity of a fixture will

allow refocusing of the light while other work proceeds, without affecting
recorded levels.
The console can always override a Tech Lock, and restore

direct control, by touching the unlock icon under the Tech Lock tool. A cue
may include a Cue

Action

to release all Tech Locks, which may be a good

idea at the

top of a performance

The

Information

screen

shows how many lights are currently Tech Locked,

under the “Locks” tab.

Defaulting Attributes

Sets and captures the selected light’s attribute to the default value. The

default results are dependent on the light and will be recorded in any
subsequent record operations.

Without entering CONTROL | ADVANCED

, from CONTROL |

WHEELS

holding down Shift

and one of the Wheel buttons

will force default

Содержание Cognito 2






































































































































































Результаты поиска

Содержание Cognito 2

Отзывы:

Похожие инструкции для Cognito 2

Бренды по названию

Популярные бренды

Pathway connectivity solutions Cognito 2, Руководство пользователя

Результаты поиска

Содержание Cognito 2

Отзывы:

Похожие инструкции для Cognito 2

Бренды по названию

Популярные бренды