When pressed, the Dead Black Out button will flash red and all lights will go dark
(output intensity falls to zero percent). The intensity levels on the touch screen
will be show with a red line above their values.
The Grand Master level will turn red and read
[DBO]
. Press the button again to
restore lights to their previous intensity.
IMPORTANT
Always warn everyone present before turning off all the lights (blacking out the
stage).
to 1, intensity levels from that recorded (and active)
Memory will not be affected by the Grand Master.
Below the Grand Master is a Shift button
. The Shift button accesses short
cuts and special features which are described in Other Features
Memory Master and Memory Black Out Button
The Memory Master is located at the bottom right of the console. The
Memory Master controls the overall intensity of the lights recorded into Memories
while those lights are active. The Memory Master’s level in percentage is show in
the
in the top right hand corner of the touch screen. When the
Memory Master is at less than 100%, the level is shown in
red
as a warning.
Playlist cues and individual lights controlled by sliders (from SELECT mode) are
not affected by the Memory Master.
Above the Memory Master is the Memory Black Out button
. Normally, the
button is backlit blue. If the Memory Master is not at its highest position, the
Memory Black Out button will glow
red
.
24
