Parweld DP231C, Руководство пользователя

Страница: 13 / 26

the tip of the torch, when the welding process
comes to an end. Soft-start: this adjusts the
contact speed of the wire, to obtain a soft weld
spark; the higher the values the lower the contact
speed. Hot-start: This sets the weld ignition
current, in order to achieve a softer weld spark;
this is generally used with the soft-start option.
Water pump: When present, this turns the water
system ON or OFF.
4.3 Pulse synergic MIG WELDING
Pulse synergic MIG welding allows obtaining
a relatively cold welding bead and good
penetration.
The low energy input makes this welding process
particularly suitable for thin layers and for
materials such as stainless steel and aluminium.
During welding with synergic adjustment, the
wire speed (i.e. welding power) can be adjusted
with knob 9 shown in Fig.1.
The other parameters are automatically adjusted
to the set power depending on the type and
diameter of the wire selected. By turning switch
10 it is possible to choose from the different MIG-
MAG welding modes;press the switch to select
the desired option. Once selected, the screen
with the welding wire material options will appear
Once the type of wire has been selected(using
switch 10), the settings page for the welding wire
diameter will appear. The wire’s diameters could
not be available for all models.
Selecting this option will take you to the welding
screen:
Arc length: This changes the length of the electric
weld arc with respect to the pre-set msynergic
values.
Deposit: This modifies the deposit of the
filler material (velocity of the wire) with respect to
the pre-set synergic values.
Double pulse: This activates (ON) or
deactivates(OFF) the two level option, i.e. the
continuous switching between two different
welding tension levels.
Settings that do not appear on the screen are
accessible by turning switch 10.