Parker VitaPump, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 45

6
Standards:

EN 61326-1:2006, Class B

EN 6100-3-2:2006

EN 6100-3-3:1995 +A1:2001 +A2:2006

EN 61010-1 Issued: 2001/03/01

Conforms to UL STD 61010-1:2012 Ed.3+R:29Apr2016

Certified to: CAN/CSA-C22.2 No 61010-1-12:2012 Ed.3+U1:U2
Installation & Start-Up:
Installation of the VitaPump™ System must be carried out only by trained personnel in accordance
with the relevant regulations and this operations manual. Make sure that the technical specifications
and input ratings of the VitaPump™ are observed. See “VitaPump™ Specifications”.
The protection provided by this equipment may be impaired if the VitaPump™ is used in a manner
inconsistent with this manual or for purposes not specified by the manufacturer.
Maintenance & Cleaning:
The VitaPump™ is practically maintenance free. The Tandem™ peristaltic pump head should
periodically have tubing debris cleaned from it, but requires no lubrication. If equipped with a piston
head, no lubrication is needed, but does require annual preventative maintenance along with the
rest of the unit.
To remove dust, dirt and stains, the outer surfaces of the VitaPump™ may be wiped using a soft,
non-fluffing cloth moistened with water. If required, you may also use a mild detergent or 2-
propanol.
Introduction:
You will find the VitaPump™ System easy to use. The VitaPump is interfaced with an electronic
balance to provide programmable vitamin feed by weight. Two user-definable alarms can be utilized
to monitor pump rate and solution batch weight. All pump parameters and data can be printed out
or sent to a PC for data archiving.