Parker VitaPump, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 45

26
4.10 Setup: Scale
4.11 Mettler - Toledo Balance Parameters:
4.111 Mettler Viper PM, PB Models
To enter the Technical Setup mode, press and hold the “Print” key until the word
CODE appears on the display. Then press “Zero”, “Tare”, “Zero”, “Tare”, “Print”, and
the word SCALE will appear. You are at the top of the menu. Use the “Zero” and
“Tare” buttons to scroll thru choices on a level, and the “Print” button to select.
Menu Level 1 Level 2 Level 3 Selected Menu
Item SCALE
1.1 Serial Number (snr)
1.2 Metrology(metrolo)
1.3 Build Unit
Resolution g
0.1g
1.4 Linearity (linear)
1.5 Geo Value (geo)
1.6 Calibration (cal)
1.8 Units
Displayed
g (grams)
1.9 Tare
1.10 Zero
4.112 Mettler ICS425 series models
To enter the Setup mode, press and hold the “Transfer” key until the word CODE
appears on the display. Then press “Zero”, “Zero”, “Zero”, “Transfer”, and an
interactive menu screen is presented. Use the displayed arrows and the related
buttons to navigate the menu and confirm the following settings are enabled.
Level 1 Level 2 Level 3 Selected Menu Item
SCALE Disp Unit & res Disp Unit 1 g
Disp Unit 2 g
Disp resolution OFF (sets to default value)
Zero AZM OFF
Filter Vibration Medium
Process Dosing
Stability Standard
Comm COM1 Mode Dialog
Param RS232
Baud 9600
Parity 8 none
H.Shake Off
When exiting the Menu a prompt to save occurs, press OK to save the changes.
NOTE: The parameters listed are the only custom settings needed for communication with Parker
systems. All others should remain at factory defaults. Consult your scale manual for help navigating
through the scale menu. If stability is an issue, adjust the Vibration and Stability settings as needed.
In Setup Mode, select “METLER”, see SETUP: SCALE: MANUF. By making this selection, the
system will implement the correct parameters for communicating with this scale. You will also need
P/N 080-072ICS Cable.