Parker IM20 Series, Руководство по эксплуатации продукта

Страница: 35 / 74

35
Correspondence of output voltage range (0-5V or 0-10V) to output frequency is set by F424 and F425. For
example, when F423=0, F424=10 and F425=120, analog channel AO outputs 0-5V and the output frequency
is 10-120Hz.
AO output compensation is set by F426. Analog excursion can be compensated by setting F426.
Token contents output by analog channel are selected by F431. Token contents include running frequency,
output current and output voltage.
When output current is selected, analog output signal is from 0 to twofold rated current.
When output voltage is selected, analog output signal is from 0V to rated output voltage 380V.
In case of F431=1 and AO channel for token current, F433 is the ratio of measurement range of external
voltage type ammeter to rated current of the servo drive.
For example: measurement range of external ammeter is 100A, and rated current of the servo is 30A, then,
F433=100/30=3.33.
5.6.5 Braking and Protection
Function code Definition Setting range Mfr's value
No
te
F611 Dynamic Braking threshold
200
～
1000 Subject to model
△
F612 Dynamic braking duty ratio
0
～
100
％
Subject to model
╳
F702 Control mode of the fan
0: fan is controlled
by temperature
1:fan is running all
the time
2:fan is controlled
by command
2
╳
F704 Detecting motor temperature
0: PTC
1: KTY84
0
√
F706
Servo drive overloading
Coefficient (%)
120
～
190 150
╳
F707
Motor Overloading
Coefficient (%)
20
～
100 100
╳
F724 Input out-phase 0: invalid; 1: valid 1
╳
F725 Under-voltage 0: invalid; 1: valid 1
╳
F726 Servo drive overheat 0: invalid; 1: valid 1
╳
F727 Selection of KTY function 0
：
invalid; 1:valid 1
╳
F728
Input out-phase filtering
constant
0.1
～
60.0 0.5
√
F729
Under-voltage filtering
constant
0.1
～
60.0 5.0
√
F731
Overheat protection filtering
constant
0.1
～
60.0 0.5
√
F750
PF2 phase loss protection
pre-alarm
0: invalid 1:valid 1
√
FB38 Hardware OE protection
0: Invalid (Without
CANcommunication
board)
1: Valid
1
√
FB44
Check whether KTY84 is
disconnected
0: Invalid 1: Valid 1
√