Parker AC890PX Series, Инженерный справочник

Страница: 436 / 460

D-234
A p p e n d i x D : P r o g r a m m i n g
AC890PX AC Drive
PREF Name Block Type Range Default ro\rw Notes
158.13 CALIBRATN STATUS REFERNCE ENCODER ENUM 0 : NOT REQUIRED
1 : DRIVE NOT STOPD
2 : MOTOR NOT STOPD
3 : ENDAT FAULT
4 : CAL IN PROGRESS
5 : LD PSN IN PRGRSS
6 : COMPLETED
7 : CALIBRATION LOST
8 : CALIBRATN FAILED NOT
REQUIRED ro Output
158.15 REV COUNT REFERNCE ENCODER INT _ 0 ro Output
158.22 SINCOS ENC VOLTS REFERNCE ENCODER ENUM 0 : 5V
1 : 10V 5V rw 2
158.23 RESET LINE COUNT REFERNCE ENCODER BOOL 0 : FALSE
1 : TRUE FALSE rw
158.24 CAL FAIL RETRY REFERNCE ENCODER BOOL 0 : FALSE
1 : TRUE FALSE rw 2
158.26 OUTPUT GBOX OUT REFERNCE ENCODER INT -2000000000 to 2000000000 1 rw 2
158.30 ENCODER
FEEDBACK
REFERNCE ENCODER REAL _.xx 0.00 RPM ro Output
158.31 LINE COUNT X4 REFERNCE ENCODER INT _ 0 ro Output
160.01 RUN SIMULATOR V MASTER SIMLATR BOOL 0 : FALSE
1 : TRUE FALSE rw
160.02 ENCODER LINES V MASTER SIMLATR INT 1024 to 1024 1024 rw 2
160.03 ENCODR DIRECTION V MASTER SIMLATR ENUM 0 : FORWARD FORWARD rw 2
160.04 V MASTER INPUT V MASTER SIMLATR ENUM 0 : RUNS FORWARD
1 : RUNS REVERSE RUNS
FORWARD rw 2
160.05 Z PULSE OFFSET V MASTER SIMLATR REAL 0.0000 to 360.0000 deg 0.0000 deg rw
160.09 SOURCE V MASTER SIMLATR ENUM 0 : V MASTER POS'N
1 : LOAD POSITION
2 : MOTOR SHAFT V MASTER
POS'N rw 2