Parker AC890PX Series, Инженерный справочник

Страница: 202 / 460

C-16
A p p e n d i x C : C e r t i f i c a t i o n
AC890PX AC Drive
Certificates
890PX
EC D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 26.11.2007
EMC Directive Low Voltage Directive Issued for
compliance with the
EMC Directive
when the unit is used
as
relevant
apparatus .
In accordance with the EEC Directive
2004/108/EC
We Parker SSD Drives, address as below, declare under our
sole responsibility that the above Electronic Products when
installed and operated with reference to the instructions in the
Product Manual (provided with each piece of equipment) is in
accordance with the relevant clauses from the following
standard:-
* BSEN61800-3 (2004)
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below, declare under our
sole responsibility that the above Electronic Products when
installed and operated with reference to the instructions in the
Product Manual
(provided with each piece of equipment), is in accordance with
the relevant clauses from the following standard :-
EN61800-5 (2003)
The drive is CE marked in
accordance with the low
voltage directive for
electrical equipment and
appliances in the voltage
range when installed
correctly.
M
ANUFACTURERS
D
ECLARATIONS
EMC Declaration Machinery Directive This is provided to
aid your justification
for EMC compliance
when the unit is used
as a
component.
We Parker SSD Drives, address as below, declare under our
sole responsibility that the above Electronic Products when
installed and operated with reference to the instructions in the
Product Manual (provided with each piece of equipment) is in
accordance with the relevant clauses from the following
standard:-
*
BSEN61800-3 (2004)
The above Electronic Products
are components to be incorporated into machinery
and may not be operated alone.
The complete machinery or installation using this equipment
may only be put into service when the safety considerations of
the Directive 89/392/EEC are fully adhered to.
Particular reference should be made to EN60204-1 (Safety of
Machinery - Electrical Equipment of Machines).
All instructions, warnings and safety information of the
Product Manual must be adhered to.
Since the potential hazards
are mainly electrical rather
than mechanical, the drive
does not fall under the
machinery directive.
However, we do supply a
manufacturer's declaration
for when the drive is used
(as a
component ) in
machinery.
Dr Martin Payn (
Conformance Officer)
* Compliant with the immunity requirements of the Standard without specified EMC filters .
PARKER SSD DRIVES
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000 FAX: +44(0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ