Parker 650G series, Руководство по эксплуатации продукта

Страница: 13 / 154

Getting Started
1-1
650G AC Drive
Chapter 1
G
ETTING
S
TARTED
Introduction
650G Frames 1, 2, 3
The 650G Series AC Drive provides simple, compact, and low-cost speed control for 3-phase
induction motors
This manual describes the low-power end of the 650G product range for the following motor
power ratings:
Nominal Input Voltage Phase Drive Power
Frame 1 230V 1 0.25 – 0.75kW 0.3 - 1.0 Hp
Frame 2 230V 1 1.1 – 1.5kW 1.5 - 2.0 Hp
Frame 2 400V 3 0.37 – 2.2kW 0.5 - 3.0 Hp
Frame 3 230V 1 2.2kW 3.0 Hp
Frame 3 230V 3 2.2 - 4.0 kW 3.0 - 5.0 Hp
Frame 3 400V 3 3.0 – 7.5kW 4.0 - 10.0 Hp
The drive features:

Local or Remote mode operation

SELV control terminals (Safe Extra Low Volts)

Intelligent monitoring strategy to avoid nuisance tripping

In-built protection of the unit against overloads, excessive voltages, phase-to-phase and
phase-to-earth short circuits

An internal RFI filter is fitted as standard

An internal dynamic brake switch for connection to an external resistor (Frame 3: 230V, and
400V units only)

Quiet operation

Controlling the unit locally using the 6511 Keypad gives access to parameters, diagnostic
messages, trip settings and for full application programming a connection to a pc is required
along with the drive software tool. Other features also become available, such as the
advanced sensorless vector control scheme which gives high torque, low speed operation;
selectable switching frequencies; and a unique Quiet Pattern control system that minimises
audible noise from the motor.
Note:
Do not attempt to control motors whose rated current is less than 50% of the drive rated
current. Poor motor control or Autotune problems may occur if you do
650G Frames C, D, E, F
The 650G, Frames C, D, E & F, is part of the 650 Series of AC Drives, designed for speed
control of standard 3-phase induction motors. It is available in a range of ratings for heavy and
normal torque applications. This dual mode feature provides a cost effective solution to general
industrial applications, as well as the control of pumps and fans.
Nominal Input
Voltage Phases Drive Power (Heavy Duty)
Frame C 230V 3 5.5 – 7.5kW 7.5 - 10 Hp
Frame D 230V 3 11 – 18.5kW 15 – 25 Hp
Frame E 230V 3 22kW 30 Hp
Frame F 230V 3 30 - 45kW 40 – 60 Hp
Frame C 400V 3 7.5 - 15 kW 310 – 20 Hp
Frame D 400V 3 15 – 30kW 20 – 40 Hp
Frame E 400V 3 30 – 45kW 40 – 60 Hp
Frame F 400V 3 75 – 90kW 75 – 150Hp

The unit can be controlled remotely using configurable analogue and digital inputs and
outputs, requiring no optional equipment.

Controlling the unit locally using the 6521 (or 6901) keypad gives access to parameters,
diagnostic messages, trip settings and full application programming. Other features also
www.comoso.com