Paragon P8 Series, Руководство пользователя

Страница: 9 / 32

9 LT6523 ( Iss 4 10/14 )

Carefully lift the glass panel from within the bottom location slot.

Remove the log fuel bed shapes and bark shapes.

Lift out the air tray assembly from the location points within the shelf.
P8 Users Instructions
SECTIONTHREE Cleaning Continued
GLASS CLEANING
From time to time it will be necessary to clean the glass panel of your P4. We recommend you use a
Ceramic hob cleaner these are available for all leading super markets: - i.e.
ASDA, TESCO,
SAINSBURY’S
Etc.
Brands of hob cleaning we have tested and found suitable are - HOB BRITE & VITRO CLEAN.

Ensure the fire as been turned OFF for at least four hours to ensure it is cool.

Remove the glass panel as described below.

Lay the glass panel down on a flat working surface on top of an old opened newspaper with the
side to be cleaned uppermost.

Follow the instructions on the Hob Cleaner Bottle.

On stubborn stains (where the appliance as been used for a long period without glass panel being
cleaned), use a new Brillo Pad well wetted with the Hob cleaner applied directly to it.

Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is
completely dry before fitting to the appliance.
Important:- The appliance must not be used if the glass panel is missing or damaged.
Note: - The glass may discolour quickly when first installed, and it should be cleaned. This is
due to the burning off process of the refractory fuel bed shapes.
REMOVING GLASS PANEL

Remove the two side covers LH and RH which
are held on with magnets.

Undo the four M4 nuts retaining the glass
fixing bracket using the tool provided then
pull clear from location studs.

Carefully lift the glass panel from within the
bottom location slot.