Paragon P8 Series, Руководство пользователя

Страница: 10 / 32

10 LT6523 ( Iss 4 10/14 )
P8 Users Instructions
SECTION FOUR Fuel Bed Cleaning and Layout

Before you clean any part of the appliance ensures that the appliance is turned off and cold.

Use only the fuel bed components provided and no additional parts must added.

Incorrect positioning of the fuel bed components could result in the staining of the glass panel.
Important: -
Refer to the ‘Health & Safety Notice located on page 3 of this booklet
before
cleaning or replacing any refractory material.

The fuel bed components are delicate and they should be handled with great care.

The moulded shapes may be removed for cleaning. They can be brushed very gently with a soft
brush to remove dust or any deposits.

A vacuum cleaner may only be used after the loose components and moulded shapes have been
removed.
CARE SHOULD BE TAKEN TO AVOID CONTACT WITH THE REFRACTORY LINING THIS IS A
DELICATE SURFACE AND SHOULD
NOT BE WIPED OR RUBBED.
It is important that all the fuel bed moulded shapes are positioned as shown in these
instructions.
P8 Users Instructions
SECTION FOUR Fuel Bed Cleaning and Layout

Place air tray within burner
shelf assembly. Place a single
layer of black bark chippings
across the burner top plate.
Place three off the log shapes
along the back edge of the air
tray as shown. Finally place a
single layer of the large bark
chippings along the front and
sides of the air tray.