Paragon P8 Series, Руководство пользователя

Страница: 19 / 32

19 LT6523 ( Iss 4 10/14 )
P8 Installation Instructions
SECTION NINE To Install the Appliance continued
Slip Bracket Option

Fit the Fire place frame assembly to the
Firebox Flange using the six off fixing
screws provided.

Attached the 2 off Slip bracket LH and
RH onto the Fireplace frame assembly
using the 6 off fixing pins provided.

Slide the firebox into the opening
guiding the gas supply pipe through the
hole at the rear LH bottom of the
firebox.

Retain the Firebox through the fixing
holes within the slip fixing bracket using
appropriate wall plugs and fixing
screws.

Refit the grommet over the pipe and
seal around the inlet hole.

Remove the gas connection cover
located within the burner shelf left hand
side and connect to the restrictor elbow
provided.

Assembly the fireplace frame as
described in the previous section.
Four Sided Trim Option

Slide the Firebox into the opening
guiding the gas supply pipe through the
hole at the rear LH bottom of the
firebox.

Refit the grommet over the pipe and
seal around the inlet hole.

Remove the gas connection cover
located within the burner shelf left side
and connect to the restrictor elbow
provided.

Fit Air tray assembly and lay fuel bed as
described in section four.