Paradyne Hotwire 8779, Руководство пользователя

Страница: 32 / 182

3. Initial Startup and Configuration
3-10
May 2002 8700-A2-GB20-40
Restoring Access to the User Interface
Improper configuration of the unit could render the user interface inaccessible. If
this occurs, access can be restored using the management card of the DSLAM.
Procedure
To reset the DSL Card using the DSLAM’s management card:
1. Follow this menu selection sequence:
Configuration
→
DSL Cards
→
Reset Slot
2. Enter DSL nn , where nn is the slot number for the DSL card you wish to reset.
3. Enter Reset.
4. Enter Y if you want to clear NVRAM also, otherwise enter N.
5. Enter Y at the prompt to confirm.
NOTE:
When you enter Y, all data connectivity is interrupted.
Resetting the Device
If the user interface is functional and you would like to reset the card without
removing the card from the DSLAM, follow this procedure.
Procedure
To reset the card using the Control branch:
1. Follow this menu selection sequence:
Main Menu
→
Control
→
Reset Device
2. The message
Are you sure?
appears.
3. Enter Yes.