Paradyne Hotwire 8779, Руководство пользователя

Страница: 13 / 182

8700-A2-GB20-40 May 2002
2-1
2
Using the Asynchronous Terminal
Interface
User Interface Access
You can communicate with the asynchronous terminal interface (ATI) using one of
the following methods:
„
Direct connection through the Management Serial port of the DSLAM (locally
or via an external modem).
„
Telnet session using a Network Management System (NMS) connected to a
LAN/WAN port on the DSLAM.
„
Telnet session through the Embedded Operations Channel (EOC).
NOTE:
Only one asynchronous terminal interface session can be active at a time, and
another user’s session cannot be forced to end. To automatically log out a
user due to inactivity, enable the Inactivity Timeout option (see
Table A-12,
Telnet Session Options, in Appendix A, Configuration Options ).
Security can limit ATI access in several ways. To set up security or a login ID, refer
to
Chapter 6, Security .
Management Serial Port Settings
Ensure that the device you connect communicates using these settings:
„
Data rate set to 9.6 Kbps.
„
Character length set to 8.
„
Parity set to None.
„
Stop Bits set to 1.
Refer to the installation document for your DSLAM. See Product-Related
Documents in About This Guide .