Paradyne FrameSaver NP 110, Руководство пользователя

Страница: 118 / 175

6 Options
980-001-0240B FrameSaver NP 110 User’s Manual - Installation Guide 6-11
November 2000
2. User - Assigns DS0s to the User Port.
DSX-RBS - Assigns DS0s to the DSX Port in RBS (Robbed Bit Signaling Mode).
DSX-CLR - Assigns DS0s to the DSX Port in CLR (Clear Channel Mode).
Drop - Assigns DS0s to the Drop Port.
3. Select “Page 2” to complete the settings for the DSX and Drop Ports, as shown in
Figure 6-6.
Figure 6-6 CSU/Interface Configuration Screen, Page 2 of 2
(with DSX/Drop Port Module)
Drop Port Settings
Data Rate - Displays the data rate which results from the settings for
“DS0 Format” and the “DS0 Assignments” for the Drop Circuit.
4. DS0 Format - Select 56k or 64k mode for all the DS0s in the Drop circuit.
5. Port TxD Clk - Configure the Drop Port interface to clock in the Tx data
based on either the DCE (this unit’s) supplied clock, or the DTE (cable loop
or router) supplied clock.
DSX Port Settings
6. Build Out - Select the Line Build-Out value for the DSX Port line
connection.
7. Framing - Selects T1 Framing format to be used.
NOTE: ANSI or AT&T are ESF format, SF includes D4. “None” disables the
DSX Port and configures the hardware to output AIS at the DSX interface.
************************* CSU / Interface Configuration ************************
Name: F@43802
Page [P=#]: 2 of 2
--------- Drop Port Settings --------- -------- DSX Port Settings --------
Data Rate: 0 Kbs Build Out [B2=] Framing [T2=]
1) T1-0<< 1) ANSI
DS0 Format [F2=] Port TxD Clk [C2=] 2) T1-7 2) AT&T
1) Nx56 kbs >>1) DCE<< 3) T1-15 3) SF
>>2) Nx64 kbs<< 2) DTE 4) T1-22 4) None
5) DX<133
6) DX<266 Ones Dens [D2=]
7) DX<399 >>1) B8ZS<<
8) DX<533 2) AMI
>>8) DX<655<<
Link Err Thres [L2=#]: Disabled
X to Disable or 1 thru 895 seconds
Help[?] Save[SA] Cancel[X]
>