Paradyne 9121 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 73

Paradyne 9121 Скачать руководство пользователя страница 45

Displaying System Information

4-21

9121-A2-GB20-00

June 1997

Port Physical Performance Statistics

These statistics only appear when Port-1 or Port-2 Physical is selected from the
Performance Statistics menu. They are only available when the port is enabled.

Main Menu

→

Status

→

Performance Statistics

→

Port-n Physical

Statistic

What It Indicates

Rx Overruns

Number of receiver overruns (too many bits) on the interface.

Rx DTR Lost Events

Number of times DTR has been lost/lowered on the interface.

Rx Non-octet Frames

Number of non-octet frames received on the interface.

Rx CRC Errors

Number of cycle redundancy check errors received on the
interface.

Tx CTS Lost Events

Number of times CTS has been lost/lowered on the interface.

Tx Underruns

Number of transmitter underruns (too few bits) on the
interface.

DBM Physical Performance Statistics

These statistics only appear when an ISDN BRI DBM is installed, enabled, and
DBM Physical is selected from the Performance Statistics menu.

Main Menu

→

Status

→

Performance Statistics

→

DBM Physical

Statistic

What It Indicates

Call Attempts

Number of unsuccessful call attempts made by the DBM.

Calls Originated

Number of successful call attempts made by the DBM.

Calls Answered

Number of successful calls answered by the DBM.

Calls Rejected
(Security)

Number of calls rejected by the DBM due to security.

Calls Rejected (Other)

Number of calls rejected by the DBM due to reasons other
than security.

Average Call Duration
(mins)

Average amount of time, in minutes, that successful calls take.
Calculation is on actual call time; it does not include security
verification, call back time, etc.

Longest Call Duration
(mins)

Amount of time spent, in minutes, during the longest
successful call. Time tracked does not include security
verification, retries, etc.

Total Call Duration
(mins)

Sum of all successful calls in minutes. Total accumulated does
not include security verifications, retries, etc.

«
...
43
44
45
46
47
...
»

Содержание 9121










































































Отзывы:

Нет отзывов