Displaying System Information
4-14
9121-A2-GB20-00
June 1997
Message
What To Do
What It Indicates
Send Pattern,
interface
3
Access unit is sending a
selected test pattern on the
network or DSX-1 interface.
H
Allow the test to continue.
H
Press Return (
↵
) while the
test is selected (via the
Command column) on the
Network or DSX-1 Physical
Tests screen ( Path: main/test/
[network/dsx] _ phy] ) to
activate or deactivate the test.
1
nnnn indicates a DCLI number of 16 through 1007.
2
A count of 99999+ means that the maximum number of errors has been exceeded.
3
interface is Network, DSX-1, Port-1, Port-2, or the basic rate interface B channel.
LMI Reported DLCIs Status
"
Procedure
To display LMI Reported DLCIs Status:
1. Use the following menu sequence:
Main Menu
→
Status
→
LMI Reported DLCIs
2. Select the desired interface (Network, Port-1, Port-2, BRI-B1, or BRI-B2).
Field
Status
What It Indicates
DLCI
16 through 1007
Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface –
the identifying number assigned to
the path between two frame relay
access unit’s ports.
DLCI statuses are listed in
ascending order ( i.e., lowest
number first ).
Status
Active
Inactive
Deleted
1
New
1
LMI-reported status of the DLCI:
H
Whether the DLCI is active
(capable of carrying data) in the
frame relay network,
H
Whether it is inactive,
H
Whether it has been deleted by
the frame relay network,
or
H
Whether it has been created by
the frame relay network.
1
Appears for 10 seconds only, before the network changes Deleted to Inactive and
New to Active.