Paradyne 9121, Руководство пользователя, Страница: 33 / 73

Displaying System Information
4-9
9121-A2-GB20-00 June 1997
Self-Test Results Messages:
These self-test result messages appear in the middle column of the System and
Test Status screen.
Message What It Indicates What To Do
B8ZS/LOS Fail The access unit failed to
transmit all ones or to
detect Loss of Signal. 1. Reset the unit and try again.
1
2. Call your service
representative for assistance.
3. Return the unit to the factory
(see Page A at the front of this
guide).
CPU Fail The CPU failed internal
testing. 1. Reset the unit and try again.
1
2. Call your service
representative for assistance.
3. Return the unit to the factory
(see Page A at the front of this
guide).
DSX-1 T1 Fail The NAM failed to internally
loop data on the DSX-1
circuit. 1. Reset the unit and try again.
1
2. Call your service
representative for assistance.
3. Return the unit to the factory
(see Page A at the front of this
guide).
Failure
xxxxxxxx
An internal failure occurred
(xxxxxxxx represents an
eight-digit hexadecimal
failure code for use by
service personnel). Record the failure code and
contact your service
representative.
Memory Fail Access unit failed memory
verification. 1. Reset the unit and try again.
1
2. Call your service
representative for assistance.
3. Return the access unit to the
factory (see Page A at the
front of this guide).
1
Record the failure code before resetting the access unit; otherwise, the error
information will be lost.