Paradyne 3172 Скачать руководство пользователя страница 86

Страница: 86 / 178

ACCULINK 3172 and 3174 E1 DSU/CSU

4-22

March 1999

3170-A2-GB20-30

Monitoring Test Patterns
on Individual Data Ports

Use the Monitor command to monitor QRSS or 511

test patterns on the channels allocated to an individual
data port.

This command provides the number of errors detected

in the test pattern (5 digits, maximum 99999).

To monitor a QRSS or 511 test pattern:

Procedure

1. Press F2 to select Test from the top-level menu

screen.

2. From the Test screen, press F3 to select Ptrns.

Test:
Rlpbk Lpbk

Ptrns

3. From the Patterns screen, press F3 to select Mon.

Patterns:
Abort

Send

Mon

4. From the Patterns Mon screen, press F1 for QRSS

or F2 for 511.

Patterns: Mon
QRSS 511

5. From the Monitor screen, press the Function key

that corresponds to the port for which you want to
monitor a test pattern. Use the scroll keys, if
necessary.

Monitor:

Name

Prt1

Prt2

Prt3

The Monitor screen appears with the error count.
If the maximum of 99999 is exceeded, OvrFlw
appears instead of the count. If the receiver loses
synchronization while the monitor is active, No
Sync appears.

Aborting Test Patterns

Use the Abort command to stop all test patterns or any

selected test pattern active on the E1 DSU/CSU.

To abort test patterns:

Procedure

1. Press F2 to select Test from the top-level menu

screen.

2. From the Test screen, press F3 to select Ptrns.

Test:
Rlpbk Lpbk

Ptrns

3. From the Patterns screen, press F1 to select Abort.

Patterns:
Abort

Send

Mon

Содержание 3172



















































































































































































Результаты поиска

Содержание 3172

Отзывы:

Paradyne 3172, Руководство оператора, Страница: 86 / 178

Результаты поиска

Содержание 3172

Отзывы: