manualshive.com logo in svg

Paradyne 3172, Руководство оператора, Страница: 100 / 178

Поделиться
Скачать
Paradyne 3172 Скачать руководство пользователя страница 100

ACCULINK 3172 and 3174 E1 DSU/CSU

C-6

March 1999

3170-A2-GB20-30

Table C-2

(4 of 4)

Port Configuration Options

Far-end: Disab
Next     Disab     Maint     Prev

Far-End Performance Statistics. Specifies whether to monitor for far-end performance report messages (PRMs) and
maintain far-end performance registers for a particular port.

Disab – Disables far-end performance statistics.

Maint – Monitors the port’s EDL for PRMs and maintains far-end performance statistics.

NOTE: This configuration option is not available and does not appear if

 

EDL is disabled.

NOTE: If the local E1 DSU/CSU is configured to maintain far-end performance statistics, then the remote E1 DSU/CSU

must be configured to send near-end performance statistics.

Mgmt Link: Disab
Next     Disab     SNMP     Prev

EDL Management Link. Specifies whether the EDL management link is enabled for a particular port. Selecting SNMP
allows SNMP management traffic to flow over the 4 kbps in-band data link provided by EDL.

Disab – Disables the port’s EDL management link.

SNMP – Enables the port’s EDL management link.

NOTE: This configuration option is not available and does not appear if

 

EDL is disabled or FDL is enabled for SNMP.

NOTE: If the local E1 DSU/CSU’s EDL is enabled, then the remote E1 DSU/CSU’s EDL must also be enabled.

Содержание 3172



















































































































































































Отзывы:

Нет отзывов