manualshive.com logo in svg

Paradyne 3172, Руководство оператора, Страница: 33 / 178

Поделиться
Скачать
Paradyne 3172 Скачать руководство пользователя страница 33

Operation

3-7

3170-A2-GB20-30

March 1999

Table 3-4

Data Port LEDs

Name

Color

Meaning

DTR

Green

Monitors the state of interchange circuit CD (ITU-T 108/1, /2) – Data Terminal Ready
received from the synchronous data DTE.

ON :

DTR is being asserted by the synchronous data DTE.

OFF :

DTR is not being asserted.

TXD

Yellow

Monitors activity on interchange circuit BA (ITU-T 103) – Transmitted Data. This is the
data sent from the synchronous data DTE to the data port on the E1 DSU/CSU.

ON :

Ones are being received from the synchronous data DTE.

OFF :

Zeros are being received from the synchronous data DTE.

CYCLING:

Both ones and zeros are being received from the synchronous 
data DTE.

RXD

Yellow

Monitors activity on interchange circuit BB (ITU-T 104) – Received Data. This is data
sent to the synchronous data DTE from the data port on the E1 DSU/CSU.

ON :

Ones are being sent to the synchronous data DTE.

OFF :

Zeros are being sent to the synchronous data DTE.

CYCLING:

Both ones and zeros are being sent to the synchronous data DTE.

CTS

Yellow

Monitors the state of interchange circuit CB (ITU-T 106) – Clear-to-Send sent to the
synchronous data DTE.

ON :

CTS is being asserted by the E1 DSU/CSU.

OFF :

CTS is not being asserted.

RTS

Yellow

Monitors the state of interchange circuit CA (ITU-T 105) – Request-to-Send received
from the synchronous data DTE.

ON :

RTS is being asserted by the synchronous data DTE.

OFF :

RTS is not being asserted.

Содержание 3172



















































































































































































Отзывы:

Нет отзывов