Paradyne 3172 Скачать руководство пользователя страница 45

Страница: 45 / 178

Operation

3-19

3170-A2-GB20-30

March 1999

Selecting the Number of Trap Managers

If you intend to issue traps to an SNMP manager(s)

from this device, you must specify the number of SNMP
managers that are to receive the traps.

To specify the number of SNMP managers to receive

traps from this device:

Procedure

1. Press F3 to select Cnfig from the top-level menu

screen.

2. Select the configuration option set to be copied

into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.

3. Press F1 to select Edit.

4. Press the

key from the Edit screen to display

the SNMP selection.

5. Select SNMP.

Edit:
User

Alarm SNMP

6. Select Trap from the SNMP Config screen.

SNMP Config:
Gen

Trap

7. Select the number of SNMP managers to receive

traps (from 1 through 6) by using the appropriate
Function key. Use the scroll keys, if necessary.

Num Trap Mgrs:1
Next

Configuring a Destination for SNMP Traps

A destination must be configured for each SNMP trap

manager specified. This configuration option is displayed
for the number of trap managers specified by the Number
of Trap Managers configuration option.

To configure an IP address for the SNMP trap

manager:

Procedure

1. Press F3 to select Cnfig from the top-level menu

screen.

2. Select the configuration option set to be copied

into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.

3. Press F1 to select Edit.

4. Press the

key from the Edit screen to display

the SNMP selection.

5. Select SNMP. (For screen displays, see the

previous section,

Selecting the Number of Trap

Managers

6. Select Trap from the SNMP Config screen.

7. Press F1 (Next) until the Trapn IP Address

configuration option appears.

8. Press F2 (Edit) to edit the IP address. You have

the option of using F3 (Clear) to reset the IP
address to the factory default 000.000.000.000.
Refer to the

Setting the IP Address

section on

page 3-15 for more information on setting an IP
address.

9. Press F1 (Next) until the Trapn Destination

configuration appears, and select the destination
for the SNMP trap by using the appropriate
Function key. Use the scroll keys, if necessary.

Trap

n Dst:

None

Com

Содержание 3172



















































































































































































Результаты поиска

Содержание 3172

Отзывы:

Paradyne 3172, Руководство оператора, Страница: 45 / 178

Результаты поиска

Содержание 3172

Отзывы: