manualshive.com logo in svg

Paradyne 3172, Руководство оператора, Страница: 82 / 178

Поделиться
Скачать
Paradyne 3172 Скачать руководство пользователя страница 82

ACCULINK 3172 and 3174 E1 DSU/CSU

4-18

March 1999

3170-A2-GB20-30

3. From the Loopback screen, press  

  twice to

display the RLB selection on the screen.

F1

Loopback:
Abort

LLB

PLB

F2

F3

4. Press F3 to select RLB.

F1

Loopback:
PLB

DLB

RLB

F2

F3

Test Started appears on Line 2. If a Repeater
loopback is already in progress, the Already
Active message appears. If an invalid combination
of loopbacks is in progress, the error message
Invld Test Combo appears (see 

Table 4-8

 for

valid loopback test combinations).

Starting a Data Channel Loopback

The Data Channel Loopback command (DCLB) loops

the data received from the network interface, for all DS0
channels allocated to the selected port, back to the
network. The loopback occurs after the data passes
through the port circuitry but before it is sent out the data
port.

To perform a Data Channel loopback:

"

Procedure

1. Press F2 to select Test from the top-level menu

screen.

2. From the Test screen, press F2 to select Lpbk.

F1

Test:
Rlpbk Lpbk

Ptrns

F2

F3

3. From the Loopback screen, press  

  three times

to display the DCLB selection on the screen.

F1

Loopback:
Abort

LLB

PLB

F2

F3

4. Press F3 to select DCLB.

F1

Loopback:
DLB

RLB

DCLB

F2

F3

5. From the DCLB screen, press the Function key for

the port for which you want to perform the data
channel loopback. Use the scroll keys, if
necessary.

F1

Loopback: DCLB
Prt1

Prt2

Prt3

F2

F3

Test Started appears on Line 2. If a Data Channel
loopback is already in progress, the Already
Active message appears. If an invalid combination
of loopbacks is in progress, the error message
Invld Test Combo appears (see 

Table 4-8

 for

valid loopback test combinations).

Содержание 3172



















































































































































































Отзывы:

Нет отзывов