manualshive.com logo in svg

Paradyne 3172, Руководство оператора, Страница: 57 / 178

Поделиться
Скачать
Paradyne 3172 Скачать руководство пользователя страница 57

Operation

3-31

3170-A2-GB20-30

March 1999

7. From the DTE Channels screen, press F1 to select

TS16.

F1

DTE Channels:
TS16

Assign

F2

F3

8. Rsvd (Reserved) is the default for TS16. This

indicates that time-slot 16 is reserved for signaling
information. Pressing F1 (Data) makes
time-slot 16 available for data.

F1

TS16:Rsvd
Data

Rsvd

F2

F3

NOTE

If TS16 is reserved for signaling,
D16 will automatically be
assigned to N16, and DTE DS0
channels allocated to the network
interface must be connected to
the corresponding channel (e.g.,
D1 to N1, D2 to N2, etc.).

9. Press  

  from the TS16 screen to return to the

DTE Channels screen.

F1

TS16:Rsvd
Data

Rsvd

F2

F3

10. From the DTE Channels screen, press F2 to select

Assign.

F1

DTE Channels:
TS16

Assign

F2

F3

11. Press the Function key below the network channel

desired. Each time that you press the Function
key, the DTE channel number will scroll up one
number. If the network channel is currently
unassigned (‘‘–” is displayed on Line 2), the DTE
channel number initially displays the same
number as the corresponding network channel
number. However, if the network channel is
currently assigned, the DTE channel number is
shown as Dn. Pressing the Function key for D31
wraps the display back to D1. Only those channels
that are not already assigned will appear on the
LCD when scrolling. The network channels
assigned to ports (Prt1...Prt4) are unavailable for
assignment.

F1

N1

N2

N3

D1

D2

–

F2

F3

Содержание 3172



















































































































































































Отзывы:

Нет отзывов