Paradox Spectra 1759EX V1.0, Справочное и монтажное руководство

Страница: 53 / 60

S
PECTRA
1759EX
51
13.12 AUTO-ARMING
(NOT TO BE USED WITH UL INSTALLATIONS)
Each partition can be programmed to arm every day at the time specified by the Auto-Arm Timer or for the period specified by the
No Movement Timer. The user can program the Auto-Arm Timer by using the System Master Code, Master Code 1 or Master
Code 2. Please note that the control panel will enter a 60-second Exit Delay period before arming the system. At this point, Auto-
Arming can be cancelled by entering a valid access code.
13.13 ALARM MEMORY DISPLAY
A record of all alarm situations that occur will be stored in memory. After disarming the system, pressing the [
MEM
] key will display
which zones were in alarm during the alarm period. To exit the Alarm Memory Display, press the [
CLEAR
] key. The control panel
will erase the contents of the alarm memory every time the system is armed.
13.14 PROGRAMMING CHIME ZONES
Users can program which zones will be Chime Enabled. A Chime Enabled zone will cause the keypad to emit a rapid intermittent
beep tone (
BEEP
-
BEEP
-
BEEP
-
BEEP
) advising the user every time it is opened. Each keypad must be Chime Programmed
separately.
10-Z
ONE
LED K
EYPAD
:
Press and hold any key from [1] to [10] for 3 seconds to activate or deactivate Chiming for zones 1 to 10. For example, press and
hold the [1] key to enable chiming on zone 1. If after pressing and holding a key, the keypad emits a confirmation beep, this
means the chime feature has been enabled for that zone. If the keypad emits a rejection beep, this means the chime feature has
been disabled for the corresponding zone.
16-Z
ONE
LED K
EYPAD
:
Press and hold the [9] key. Enter the 2-digit (01 to 15) zone number(s). When the corresponding LED is on, the zone is chimed.
When the corresponding LED is off, the zone is unchimed. When the desired zones are chimed, press [
ENTER
].
LCD K
EYPAD
:
Press and hold the [9] key. Enter the 2-digit (01 to 16) zone number(s), or use the arrow keys to scroll through the zones. and
when the appropriate zone is displayed, press the [
FNC
1] key. When the desired zones are chimed, press [
ENTER
].
13.15 KEYPAD MUTING
(NOT TO BE USED WITH UL INSTALLATIONS)
Press and hold the [
CLEAR
] key for 3 seconds to enable or disable keypad muting. When muted, the keypad will only beep when
a key is pressed or when the keypad emits a Rejection or Confirmation Beep. All other beep functions are disabled.
13.16 KEYPAD BACKLIGHT (1686H and 1686V Only)
The illumination level behind the keys can be modified to suit the user’s needs. There are four backlight levels. The [
MEM
] key is
used to set the desired level. Each consecutive push of the [
MEM
] key will increase the backlight level until the maximum level is
reached. After reaching the maximum level, the backlight level will return to the lowest level and the whole process is repeated.
To change the backlight level:
How do I Modify The Backlight?
1)
Press and hold the [
MEM
] key for 3 seconds.
2) The [
MEM
] key will illuminate.
3) Press the [
MEM
] key to set the desired backlight level.
4) Press [
CLEAR
] or [
ENTER
] to exit.