PANHANS 3V, Руководство по эксплуатации

Страница: 40 / 54

BA_PH_3V_EN_07-22.docx
40
11.6.5
Saw Blade Guides - Troubleshooting
Fault Possible Cause Remedy
The side rollers
or back rollers
do not rotate
Insufficient or incorrect lubrication
→
Clean bearings and oil
according to section

17.3
Incorrect basic adjustment of the guide
→
Check basic adjustment
(

Figure 24) and readjust if
necessary (see section

11.6.2)
Poor cleaning
The back roller is
cut by the back
of the saw blade
Back roller does not rotate
→
Clean bearings and oil
according to section

17.3
Saw blade runs too far
inside on the back roller
→
Check basic adjustment
(

Figure 24) and readjust if
necessary (see section

11.6.2)
The running surface
of the back roller wears
more on the outside
than on the inside
Saw blade runs too far
too far out on the backrest roller
→
Check basic adjustment
(

Figure 24) and readjust if
necessary (see section

11.6.2)
The back roller is not exactly
vertical to the back of the saw blade
The saw blade is
pushed forward
by the side rollers
The side rollers are too
tight to the saw blade
→
Adjust side rollers correctly
according to section

11.6.2
and clean dirty parts.
The running surfaces of the side
rollers or saw blade are dirty
For maintenance and lubrication of the saw blade guides please read the section

17.3.