BA_PH_3V_EN_07-22.docx
14
4.4
Accident Prevention
To avoid accidents, the following rules must be observed for operation:
•
Prevent unauthorized persons from gaining access to the machine.
•
Keep unauthorized persons away from the danger areas.
•
Repeatedly inform present other persons about existing residual risks (see section
•
Conduct and record regular training & instruction for persons who must be in the area of the machine.
•
New employees must be trained internally to work on a thickener and this training must be documented.
4.5
General Safety Regulations
In general, the following safety regulations and obligations apply when handling the bandsaw machine:
•
The bandsaw machine may only be operated in a technically perfect and clean condition.
•
It is prohibited to remove, modify or bypass any protective, safety or monitoring equipment.
•
It is forbidden to modify or alter the machine without the written approval of the manufacturer / supplier.
•
Faults or damage must be reported to the operator immediately, eliminated without delay and repaired if
necessary.
•
For repairs, only original spare parts may be used.
•
All protective, safety and monitoring devices must be regularly checked and maintained by the operator.
•
Only instructed, trained or qualified persons may work on this machine.
•
Maintenance work must be carried out and documented in accordance with the maintenance instruc-
tions.
•
After maintenance or repair, the machine may only be started with all protective devices fitted. A respon-
sible person must be defined for this purpose, who checks that the guards have been properly installed.
•
For the operation of a bandsaw machine, the respective national safety regulations for employees as well
as the national safety and accident prevention regulations apply.
4.6
Machine Description
The PANHANS 3V is a modern and spacious bandsaw suitable for cutting (cross-cutting and splitting) wood and
similar materials. The tool is a toothed steel band to which the cutting movement is transmitted by three band
rollers (only one of which is motorised).
After actuating the main switch, the drive motor drives the lower flywheel. All operating elements as well as the
two emergency stop buttons are easily accessible from the machine operator's workplace.
The machine operator transfers the cutting movement to the workpiece, either manually or by means of addi-
tional auxiliary or pushing devices. The adjustable guard reduces the risk of contact with the working tool.
Содержание 3V
Страница 2: ...BA_PH_3V_EN_07 22 docx 2 Space for notes...
Страница 4: ...BA_PH_3V_EN_07 22 docx 4 Space for notes...