Pangolin Flashback 3 XE, Руководство пользователя

Страница: 49 / 56

Appendix A 49
connector). The “Reference” signal goes to pin 1 of the XLR, “DMX plus” signal
goes to pin 2 of the XLR, and the “DMX minus” goes to pin 3 of the XLR
connector.
The FB3 has built in termination which can be enabled by connecting the "DMX
minus" signal to "Termination" signal (short pins 3 and 4). This is definitely
recommended if you are operating with a DMX cable longer than around 10 feet,
and if the Flashback 3 SE is the last device on the DMX chain.
The DMX cable can be connected directly to the QM2000 DMX connector, and
the FB3 board can be controlled by Showtime. Please contact Pangolin to obtain
the necessary files and information about how to do this.
You can find the DMX Channel Assignment table on the next page.
NOTE: DMX-512 input is disabled while the LiveQUICK Program is running.
When you exit the LiveQUICK program, DMX-512 operation will resume.