Pangolin Flashback 3 XE, Руководство пользователя

Страница: 22 / 56

22
The Projection Zones Dialogue Box shows (4) Zones Possible
1. Geometry Correction Settings: Select attribute to change then use faders present around the patter
window to change the value. The image will change to show you the effect.
2. Reset the selected item you are adjusting to the default value
3. Resets all items in Geo Correction to the default value
4. Selects the Test Pattern or Current cue to use during adjustments
5. Enables laser Output so you can see what you are doing in laser light
6. Test pattern or cue preview
7. OK (Accept changes and close)
8. Cancel (Close window with no changes)
Example of Setting the Graphics Zone 1 and adding Geometric Correction (Off Angle Projection)
Practical Exercise:
Let’s say that your particular set up is like this.