Pangolin Flashback 3 XE, Руководство пользователя

Страница: 18 / 56

18
projector settings or cue settings) See warnings below
WARNING:
Do not adjust the scan speed to high if you do not know the scan speed capabilities of
your device. Failure of the scanners can occur. Consult the manufacturer if you question the scan speed of
your device. You can overdrive scanners with any professional laser control system.
Use the ILDA test pattern in the projector settings menu section to test the performance of the scanner and
refer to the ILDA standard for the test pattern (Contact us if you have questions about this). Consult your
Pangolin user manual for the proper scan speed adjustment.
e. BT Effects Section
i. This device contains only one BT PCB. If your projector shows two rows of FX
buttons then it has two BT PCB’s which is found in the new Horizon Series. See
Horizon Series User Manual for more information.
ii. FX1: Activates 20 Position DG
iii. FX2: Activates Dual Counter Rotating DG’s
iv. FX3: Activates Stargate Static DG
v. FX4: Activates Machado Static DG
vi. Wheel: Select DG when FX1 is selected
vii. Dual Vertical Faders: Adusts Speed and direction of dual counter rotating DG
viii. Color Palete: Click Arrow to activate and grab dot in palete to adjust color of the laser
output when BT PCB is activated
NOTE: The GUI for this section changes or is present only if the hardware is present in the device
connected to the PC and software or if the laser is offline. Consult your devices user manual if your GUI
differs from this GUI.
WARNING: The use of DG’s can be dangerous if the (Zero Order CENTER BEAM) is projected into
the audience. Use Caution when setting up your device so the Zero Order does not project into the
audience and follows your local laser safety regulations) Follow all safety warnings in your user manual
AVOID DIRECT EYE EXPOSURE to the Center Beam. Depending on the output of your laser projector
even diffracted (divided beams) can be harmful.