Pangolin Flashback 3 XE, Руководство пользователя

Страница: 17 / 56

17
b. Position and Rotation
i. Use the XY Coordinates grid to move the projection zone on the fly.
ii. Use the X Y Z Knobs for Rotation of the image live
iii. Reset Position: Resets the position to the default (Which is the settings stored in
projector settings and geometry correction section)
c. Color
i. Fade: Uses the analog signal to fade the laser output from 0-100%
ii. Visible Points: Write in Write Out Function 0-100%
iii. Color: Override Frame Settings for color: Far Left is default frame color settings: Far
right is 100% RGB, RGY, G, B, BG, R Depending on devices laser configuration. If the RGB Laser is
white balanced or if you have achieved white balance in the projector settings then the far right should
be White. Same with Yellow, or Cyan projectors.
d. Playback
i. Animation Speed: Adjusts the playback speed (If cue is stored in memory)
ii. Scan Rate: Adjusts scan speed from 0-100% (100% equals 30K) (Overrides