Pangolin Flashback 3 XE, Руководство пользователя

Страница: 20 / 56

20
11.
1. Adjusts Scan Speed (Master Scan Rate)
2. Adjusts Color Shift (For Analog Solid State Lasers (3) is the normal Setting. (4) for PCAOM)
3. Minimum Points at output (200 is default)
4. Select RGB, RGY, or Single Color depending on the laser configuration of the device
5. Adjust the white balance of the projector by adjusting the RGB color lines intensity from 0-100%
6. Enable Laser Output
7. Choose Test Pattern
8. Choose Selected or Current Cue in the workspace to adjust to
9. Active (Selected Test Pattern)
10. OK to accept
11. Cancel with no effect or change