Pangolin Flashback 3 XE, Руководство пользователя

Страница: 44 / 56

44
Assigns the cues the Projection Zones you set up in Section 1.
Automatically Play this cue after power up of the FB3 SE Board:
Click this only when you want this one cue to be played back immediately on power up. This is for
Autoplay function. You can link from the Auto Cue to other cues but you must always link back to the
auto cue and assign stop output at end for all cues within the linked sequence. See Linking (Section 6)
The Autoplay cue is then identified by this icon:
Output Tab
Scan Rate: Adjusts Scan Rate for selected cue
Sample Rate: Adjust sample rate
Blank Shift: Adjust Blank Shift
Note: Selecting Sample Rate, Overwrite color
channel settings overrides main projector settings
thus enabling custom settings for each cue.
R, G, B, Output setting enables custom
adjustments f the white balance of frame colors.
Compression: Select Compression Mode
(Maximizes Memory)
Vector Settings
Same as in Projector Settings however these
adjust only the selected Cue. They have no
effect on the global projector settings.