Settings and Printing
Network
Network
Maintenance and Spec.
Appendix
163
■
TCP/IP
Name
Factory Default
Description
Use TCP/IP Protocol
ENABLE
Enables or disables TCP/IP protocol.
Use DHCP/BOOTP
ENABLE
Enables or disables DHCP/BOOTP. When
enabled, DP-CL21P or DP-CL21M gets an IP
Address from the DHCP/BOOTP server while
booting. To use this function DHCP/BOOTP
server must exist on the network.
Use RARP
ENABLE
Enables or disables RARP. RARP is a protocol
which obtains IP Address from RARP server.
When using this function, a RARP server must
exist on the same network.
IP Address
0.0.0.0
IP Address for the network in which the
DP-CL21P or DP-CL21M is installed.
Subnet Mask
0.0.0.0
Subnet mask for the network in which the
DP-CL21P or DP-CL21M is installed.
Default Gateway
0.0.0.0
IP Address of the default gateway through which
systems on other networks can be reached.
Use FTP/LPD Banner
DISABLE
Prints a banner page when using LPR printing.
DNS Server -
Primary (Preferred)
Server
0.0.0.0
Sets the address of the DNS Server.
DNS Server -
Secondary (Alternate)
Server
0.0.0.0
Sets the address of another DNS Server.
WINS Server - Primary
(Preferred) WINS
Server
0.0.0.0
Sets the WINS server (primary) address. The
Computer Name of the NetBEUI/NetBIOS
is used for NETBIOS name.
WINS Server -
Secondary (Alternate)
WINS Server
0.0.0.0
Sets the WINS server (secondary) address.
The Computer Name of the NetBEUI/NetBIOS is
used for NETBIOS.
WINS Server -
Scope ID
NULL
Sets Scope ID.