Settings and Printing
Network
Network
Maintenance and Spec.
Setup in NetWare
111
This chapter explains how to setup a client computer to print via a NetWare server.
Perform the following steps:
Step 1: Setting up the printer and server
Step 2: Setting up the client
■
Step 1: Setting up the printer and server
There are four ways of setup.
•
[A] Using NDS (Novell Directory Service) - PSERVER mode
(
see page 112
)
•
[B] Using NDS - RPRINTER (NPRINTER) mode
(
see page 117
)
•
[C] Using NDPS - Novell Gateway (NetWare 5.x / NetWare 6 only)
(
see page 124
)
•
[D] Using NDPS - HP Gateway (NetWare 5.x / NetWare 6 only)
(
see page 130
)
You may need to check with your network administrator which to select. For detailed information on
these modes, refer to the NetWare manual or the Novell web site.
Setting the NetWare server is almost performed on the client. You must log on the server using the
supervisor privilege. Novell Client software must be installed in your computer prior to setting up.
Setup in NetWare
In NetWare 4.x / NetWare 5.x / NetWare 6
