Settings and Printing
Network
Network
Maintenance and Spec.
Setup in NetWare
130
[D] Using NDPS - HP Gateway (NetWare 5.x / NetWare 6 only)
NDPS Manager and NDPS Broker must be created before proceeding the following steps.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
3
Double click
nwadmn32.EXE
to display the
NetWare Administrator
window.
4
With the container object highlighted, click
Create...
from the
Object
menu.
The New Object window is displayed.
5
Select
NDPS Printer
from the
Class of new object
box, then click
[OK]
.
The Create NDPS Printer window is displayed.
6
Enter a printer name (for example:
DP-CL21M
) in the
NDPS Printer Name
box,
click on the
Create a New Printer Agent
check button and click
[Create]
.
The Create Printer Agent window is displayed.
7
Select the
Hewlett-Packard IP/IPX Printer Gateway
from the
Gateway Types
window, click the
[…]
button to the right of the
NDPS Manager Name
box,
select any NDPS Manager from the left window and click
[OK]
.
8
Click
[OK]
.
The Configure HP Printer Gateway for PA window will be displayed.
9
Leaving the –
No Printer Type
– selected from the
Printer Type
box, click on
either
IP Printer
or
IPX Printer
check box. Select the printer from the list
displayed in the
Printer/JetDirect
window, and then click
[OK]
.
The Select Printer Drivers window is displayed.
NOTE:
• If the server and the printer are communicating using TCP/IP protocol, then use IP Printer.
10
If the printer driver(s) have not been installed into the NDPS Broker, then select
[None]
from the
Printer Drivers
box. Click
[Continue]
.
NOTE:
• For detailed instruction on adding the alternate printer driver, refer to the NetWare manual.
11
Click
[OK]
.
The NDPS printer
DP-CL21M
will be displayed in the NetWare Administrator window.