Panasonic WJSX150 - SWITCHER - ADDENDUM, Руководство по эксплуатации

Страница: 87 / 148

89
■
Log-out
This operation is skipped when the auto log-out is set to
ON.
This function is used when an operator leaves the controller
or no longer requires access to the system.
1. To logout from the system press the CLEAR button
while holding down the SHIFT button.
"NO USER" appears on the LED display of the con-
troller.
Notes:
• If you want to save the power consumption, discon-
nect the PC plug from the controller, and remove
the AC adapter from the AC outlet.
• If the auto log-out is set to ON, any operator can
logout automatically if no operation takes place for
a specific time. "NO USER" automatically appears
on the LED display.
• The time to logout is configurable through WJ-
SX150 Administrator Console. (Refer to p. 77 Auto
Login/Logout.)
SHIFT
CALL
PRESET
PROGRAM
PRESET
PAUSE
TOUR SEQ
NEXT
AUTO PAN
PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ON AUX2 OFF
EL-ZOOM
AUX1 ON AUX1 OFF
STILL
■
Auto Log-in
If the auto log-in is set to ON, any operator can login auto-
matically. After the controller is turned on, "AUTO" appears
on the LED display for approximately 2 seconds, then
"READY" automatically appears.
Auto log-in is configurable through WJ-SX150 Administrator
Console. (Refer to p. 77 Auto Login/Logout.)
■
Auto Log-out
If the auto log-out is set to ON and no operation takes place
for a specific time, any operator can logout automatically.
"NO USER" automatically appears on the LED display.
Auto log-out and the time to logout are configurable
through WJ-SX150 Administrator Console. (Refer to p. 77
Auto Login/ Logout.)