Panasonic WJSX150 - SWITCHER - ADDENDUM, Руководство по эксплуатации

Страница: 30 / 148

31
SUSPEND: To suspend an activated alarm, press this
button while holding down the SHIFT button. "ALM
SUSPENDED" will appear on the monitor. To cancel
the suspension, press this button while holding
down the SHIFT button again.
&5
Function 1 button (F1/CAM SETUP)
Press this button while holding down the SHIFT button
to open the camera's SETUP MENU on the active moni-
tor.
The function as the F1 button is reserved for future use.
&6
Tour Sequence button (TOUR SEQ)
Press this button, in combination with the numeric but-
tons, to run a tour sequence on the active monitor.
&7
Group Sequence button (GROUP SEQ)
Press this button to select a group sequence.
To select a group, press the corresponding numeric
buttons, followed by the GROUP SEQ button.
&8
Function 2 button (F2/INDEX)
Displays date and time entry form during the recorder
mode.
&9
Next button (NEXT)
Moves a tour sequence one step forward from the step
previously paused on the active monitor.
Also selects a camera. If the active monitor is in the
spot mode, press NEXT while holding down the CAM
(SET) button, to replace the currently selected camera
with the next higher-numbered camera.
During the recorder mode, this button moves the play-
back image one step forward.
*0
Previous button (PREV)
Moves a tour sequence one step backward from the
step previously paused on the active monitor.
Also selects a camera. If the active monitor is in spot
mode, press PREV while holding down the CAM (SET)
button, to replace the currently selected camera with
the next lower-numbered camera.
During the recorder mode, this button moves the play-
back image one step forward.
*1
Recorder button (RECORDER)
To enter the recorder mode, press this button.
Note: Only one operator can enter the recorder mode
at one time.
*2
Pause button (PAUSE)
Pauses a tour sequence, and the playback of the
recorded images* that is being run on the active moni-
tor.
Also restarts the sequence from the next step forward,
or the playback of the recorded images*.
*3
Play button (PLAY)
Starts the playback of the recorded images*.
*4
Stop button (STOP)
Ends a tour sequence, or stops the playback of the
recorded images* that is being run on the active moni-
tor.
*5
Shift button (SHIFT)
To activate the alternate function of each button, press
this button, in combination with buttons associated with
special functions.
*6
On-screen Display button (OSD)
In combination with the numeric buttons, this button
toggles the currently selected display items on the
active monitor.
1: Clock display (T&D)
2: Camera title display (CAM ID)
3: Event display (EVENT)
4: Monitor status display (MON STATUS)
5: All displays (ALL)
7: ALARM HISTORY table (ALM H)
8: VIDEO LOSS STATUS table (VLD H)
9: SYSTEM STATUS table (SYS S)
*7
Setup button (SETUP)
To display the unit's SETUP MENU, press this button
while holding down the SHIFT button.
* The playback of the recorded images is possible when
a recorder is connected.